Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-434002.png)
8. Support gearbox on a jack.
9. Remove nut and bolt securing mounting to cross member.
10. Remove 6 bolts securing cross member and remove cross member.
11. Remove snubbers from mounting.
12. Lubricate centre screw of LRT-41-018 with Molybdenum Disulphide grease and assemble tool as shown to remove mounting from transfer
gearbox.
CAUTION: Ensure tool alignment indicator is at the 6 o'clock position.
Refit
1. Clean mounting and mating faces.
2. Lubricate new mounting and bore in transfer gearbox casing to aid assembly.
