Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Variable Valve Timing Solenoid: Service and Repair
RH Variable Camshaft Control (VCC) Control Solenoid
Control solenoid - variable camshaft control (VCC) - RH
Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.
Refer to Service Precautions.
Remove
1. Disconnect battery earth lead.
2. Remove air intake hose.
3. Disconnect multiplug from VCC solenoid.
4. Remove 2 bolts securing VCC solenoid seal and remove seal.
5. Fit LRT-12-226 to VCC solenoid and remove solenoid.
CAUTION: Do not allow oil to come into contact with the drive belts while removing the solenoid.
Refit
1. Fit LRT-12-226 to VCC solenoid and fit solenoid.
2. Tighten VCC solenoid to 25 Nm (18 ft. lbs.) and remove LRT-12-226.