Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-276001.png)
Washer Fluid Level Switch: Service and Repair
Sensor - Washer Reservoir Level
Service Repair No - 84.10.17
Remove
1. Turn steering wheel to full lock.
2. Raise vehicle on lift.
3. Remove screw securing bumper extension to wheel arch liner.
4. Ease lower edge of wheel arch liner aside for access, from rear of bumper release level sensor from washer reservoir.
5. Disconnect multiplug from level sensor and remove sensor.
Refit
1. Connect low level sensor to multiplug and fit to reservoir.
2. Position wheel arch liner and secure with screw.
3. Lower vehicle ramp.
4. Position steering wheel straight ahead.
