Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
9.
Remove the tool.
10.
If the plastic motor clip is broken, or breaks during motor removal, perform the following:
Remove the broken clip by levering it off. (Figure 6)
CAUTION:
It is critical that the plastic clip is fully engaged into the steering column aluminum body. There will be a loud snapping noise as the clip engages.
^
Align the key on the new plastic motor retaining clip with the machined slot on the aluminum body of the column
^
Snap the new clip into position.
^
Verify that the key is located in the slot and the clip is securely located.
11.
Insert the flexible drive into the spindle. (Figure 7)
12.
Slide the motor fully back into the plastic clip, guiding the flexible drive into the gearbox.