Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Steering Wheel Heater Switch: Service and Repair
Electronic control unit (ECU) - heated steering wheel
Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.
Refer to Service Precautions.
WARNING: Always disconnect both battery leads before beginning work on the SRS system. Disconnect the negative lead first. Never
reverse connect the battery.
Remove
1. Make the SRS system safe.
2. Remove airbag module from steering wheel.
3. Disconnect multiplug from rotary coupler.
4. Release multiplugs from clips on steering wheel and ECU, disconnect multiplug and remove the ECU.
Refit
1. Position ECU, connect multiplug and fit ECU into location. Fit multiplugs into clips.
2. Connect multiplug to rotary coupler.
3. Fit drivers airbag.