Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
14. Install tool 205-735 to the right-hand driveshaft inboard joint. (Figure 5)
15. Using levers, release the driveshaft from the differential.
16. Using a suitable 3/8" - drive extension through the sub-frame mount, support the right-hand driveshaft, lower arm and tie rod. (Figure 6)
17. Remove tool 205-735 from the right-hand driveshaft inboard joint.
18. Raise the stabilizer bar and retain in the raised position with a wooden block between the stabilizer bar and the sub-frame.
19. Disconnect the breather hose from the differential. (Figure 7)
NOTE:
Securing bolt above pinion remains captive to differential due to access.
20. Remove the four differential securing bolts. (Figure 7)
21. With assistance, remove the differential assembly through the sub-frame by:
^
Releasing the differential assembly from the engine sump.