Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
/v8-4398cc_4.4l_(m62)/Page-972007.png)
15. Using LRT-54-027 release lower arm ball joint and disconnect lower arm from hub.
CAUTION: Ensure ball joint seal is not damaged. A damaged seal will lead to premature failure of the joint.
16. Loosen bolt securing tie rod to subframe one quarter of a turn.
17. Remove nut securing tie rod to hall joint.
18. Using LRT-54-027 release tie rod from ball joint
CAUTION: Ensure ball joint seal is not damaged. A damaged seal will lead to premature failure of the joint.
19. Fit center screw LRT-60-030/3 to LRT-60-030/1 and fit to hub with spacer LRT-60-030/2. Secure with nuts LRT-60-030/5.
20. Tighten contra screw to press drive shaft from flange.
21. Remove tools.
