Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
14. Install the crown wheel assembly. (Figure 33)
15. Use a center punch to mark the differential with three dots in a triangular pattern in the position shown. (Figure 34)
CAUTION:
Ensure the mating faces are clean, before the sealant is applied.
16. Apply sealant to the differential upper casing mating faces. (Figure 35)
CAUTION:
Ensure the bearing cup and shim is retained in the differential casing.
17. Install the differential upper casing.
NOTE:
Tighten the bolts in the sequence shown.