Range Rover (LM) V8-4398cc 4.4L (M62) (2003)
Wiper Motor: Service and Repair
Motor - Wiper
Motor - Wiper
Service repair No - 84.15.12
Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.
Remove
1. Disconnect battery earth lead.
2. Noting fitted position, remove nut securing windscreen wiper linkage and release linkage from motor.
3. Remove 3 bolts securing mounting plate to wiper motor.
4. Disconnect multiplug trim motor.
5. Remove motor.
Refit
1. Position wiper motor to bracket, fit bolts and tighten to 10 Nm (7 lbf.ft).
2. Connect multiplug to motor.
3. Connect battery earth lead.
4. Turn ignition key to position II, ensure wiper motor is in park, turn ignition off.
5. Disconnect battery earth lead.
6. Position wiper linkage to motor, tit nut and tighten to 25 Nm (7 lbf.ft).
CAUTION: Ensure wiper motor is timed with wiper linkage.
7. Connect battery earth lead.