Range Rover (LM) V8-5.0L SC (2010)
/v8-5.0l_sc/Page-1433002.png)
4. Remove anti-back out feature. (Figure 1)
5.
Plug wire assembly from kit (LR023438) into C0473 Main/Trailer N - Pin 11 (terminated end) and route alongside main harness towards C0117.
(Figure 1)
6. Locate wire 142 (Green/White) within C0117 Main/Tailgate 1 - pin 6. (Figure 2)
Cut lead approx 50mm from back of connector.
7. Splice other ends of kit to each cut end. (Figure 3)
