Range Rover (LM) V8-5.0L SC (2010)
6. Remove the A/C pipe. (Figure 4)
Remove the Torx bolt.
7. Remove the bracket from the A/C pipe. (Figure 5)
CAUTION:
Ensure the union is correctly aligned. Failure to do so may result in damage to the vehicle.
8. Install the bracket on to the new A/C pipe. (Figure 5)
9. Install the A/C pipe. (Figure 4)
^
Tighten the Torx bolt to 18 Nm (13.25 lbf ft).
CAUTION:
Ensure the union is correctly aligned. Failure to do so may result in damage to the vehicle.
10. Connect the A/C pipe. (Figure 3)
^
Tighten the nut to 10 Nm (7.5 lbf ft).
11. Secure the bracket. (Figure 2)