landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Brake Master Cylinder|Service Precautions|Page 3501 > < Hydraulic Control Assembly - Antilock Brakes|Service and Repair
Page 1
background image

Brake Master Cylinder: Service Precautions

DO NOT OVER FILL RESERVOIR DEPRESSURIZE SYSTEM 

WARNING:  Before bleeding the system or working on any component in the brake system the following procedure MUST be carried out
to depressurize the accumulator.
 

1. Switch off ignition.
2. Operate the brake pedal 30 times. Pedal travel will increase slightly and reduced resistance will be felt as pressure decreases.
3. Wait for 60 seconds, press the brake pedal four more times. This procedure will ensure that all pressure is evacuated from the system

Brake Master Cylinder|Service Precautions|Page 3501 > < Hydraulic Control Assembly - Antilock Brakes|Service and Repair