landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Air Register|Service and Repair|Page 4586 > < Blend Flap Servos - Heater Only|Page 4582
Page 1
background image

Air Register: Service and Repair

Face Level Vents Replacement 

Service repair no - 80.15.04 - RH
Service repair no - 80.15.05 - LH
Service repair no - 80.15.63 - Centre

Remove

Centre Vent

CAUTION:  Use of the following method may cause damage to the vanes of the vent. It is not advisable to remove the vent unless it is to be
renewed
.

1. Carefully insert a 5 mm Allen key, or similar hooked tool, through vent as shown.

2. Withdraw central face level vent from fascia.

Side Vents
3. Passenger side: Open glove box. Remove 5 screws securing glove box liner to fascia and lower glove box for access to rear of vent.

Air Register|Service and Repair|Page 4586 > < Blend Flap Servos - Heater Only|Page 4582