Range Rover (LP) V8-4.6L (2001)
REPAIR PROCEDURE
INSTALL LINK LEAD RESISTOR
1.
Refer to RAVE Workshop Manual section 82.20.94 and perform steps 1-5 to gain access to the heater temperature sensor.
2.
Disconnect the heater temperature sensor multi-plug. (Arrowed in Figure 1).
3.
Connect the link lead MQ501010) to the heater temperature sensor and electrical harness (Figure 2).
4.
Reverse the Workshop Manual section 82.20.94 removal procedures steps 1-5, and install the removed components.