Range Rover (LP) V8-4.6L (2001)
/v8-4.6l/Page-1711001.png)
Brake Light Switch: Service and Repair
STOP LIGHT SWITCH
70.35.42
1. Remove closing panel from fascia.
2. Remove screw and remove heater outlet duct.
3. Remove 4 scrivets and remove access panel from fascia.
4. Release and remove heater air duct for access to stop light switch.
5. Disconnect multiplug from stop light switch.
6. Remove stop light switch from pedal bracket.
Refit
7. Ensure new stop light switch plunger is fully extended for initial setting.
8. Fit stop light switch to pedal bracket and connect multiplug.
9. Fit heater air duct.
10. Fit access panel and secure with scrivets.
11. Fit heater outlet duct and secure with screw.
12. Fit closing panel to fascia.
