Range Rover (LP) V8-4.6L (2001)
Wiring Harness: All Technical Service Bulletins
Campaign - Engine Harness Inspection/Re-Routing
No: SB276
Ref:
Issue: 1
Date: 16 March 2005
Engine Harness Inspection / Repair
AFFECTED VEHICLE RANGE:
Range Rover (LP)
XA403796 to 1A458539
SITUATION:
ENGINE HARNESS DAMAGE / CHAFE
The original harness routing path can permit the engine harness to chafe on the engine compartment fuse box bracket. Extended chafing can result in
electrical short or system malfunction.
RESOLUTION:
INSPECT AND REPOSITION HARNESS
At the next service opportunity inspect the harness for damage. If damage is determined, repair the harness using harness repair kits. If damage is severe,
contact the Land Rover HelpLine for consultation and authorization to replace the harness. Route the engine harness as specified in this Bulletin.
PARTS INFORMATION:
NOTE:
Supply of engine harnesses is extremely limited. DO NOT order harnesses for stock.
1.
Contact the Technical HelpLine to determine if a replacement harness is required for repair after inspection indicates that it MIGHT be.
2.
* VIN ranges are approximate. A label with part number is fitted to the harness adjacent to the battery box. Prior to ordering a replacement harness
the harness part number on the vehicle must be checked to ensure that the correct harness is ordered.
NOTE:
Repair connectors are supplied in packs of five. Due to limited availability, please restrict parts order to one pack of each of these part numbers.
TOOLS
Ratchet crimping tool
Hot air gun
DDW WARRANTY CLAIMS:
Warranty claims should be submiffed quoting program code B276 together with Option Code "X".
Option Code X requires entry of the relevant SROs from the Table, and the parts used for the repair.
This will result in payment of stated time and where applicable parts expense.