Range Rover (LP) V8-4.6L (2001)
Telescoping Wheel Motor: Customer Interest
Steering - Steering Column Reach Motor Noise
No: 57/05/05/NAS
FGN LM211
Ref:
Issue: 1
Date: 12 April 2005
Steering Column Reach Motor Noise
AFFECTED VEHICLE RANGE:
New Range Rover (LM)
All
SITUATION:
NOISE FROM MECHANISM DURING REACH ADJUSTMENT
NOTE:
Reach mechanism "jamming" will generally be the result of improper lubrication. Refer to TIB 57/04/05/NA5 for guidance on the lubrication only
procedure associated with reach mechanism jamming.
The customer may complain that during reach adjustment a noise is evident from the steering column during the adjustment motion.
RESOLUTION:
STEERING REACH MOTOR REPLACEMENT
Upon customer complain of the noise symptoms during reach adjustment, follow the Repair Procedure outlined in this bulletin to install a reach motor
kit. If it is determined during troubleshooting that the reach motor has electrical faults this procedure may also be followed.
PARTS INFORMATION:
NOTE:
There is no requirement to replace anything other that the motor to repair a reach mechanism adjustment noise condition or an reach motor electrical
fault. The steering column assembly is not required.
DDW WARRANTY CLAIMS:
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal warranty policy and procedures apply.
Material allowance is included in labor operation.
REPAIR PROCEDURE
REPLACE REACH MOTOR
NOTE:
GTR lookup sequence is as follows:
GTR Home > NAS > Service Information/ LM Range
Rover/2005 > Workshop Manuals > Service
Procedures > Bookmark "STEERING/REPAIRS" >