Range Rover (LP) V8-4.6L (2001)
/v8-4.6l/Page-1130002.png)
9. Fit adaptor LRT-54-008I1 3 to base tool and secure with screw.
10. Position base tool assembly to axle yoke.
11. Fit lower joint to adaptor LRT-54-008/1 4
12. Fit adaptor and joint assembly onto base tool.
13. Align tool assembly and press joint into axle.
NOTE: Align tool assembly between each stroke of the ram until the joint is fully seated.
CAUTION: Damage to joint boot will result if tool is not correctly aligned during fitment.
14. Remove base tool assembly.
15. Fit swivel hub, refer to Suspension and Steering/Suspension/Knuckle/Service and Repair See: Front Steering Knuckle/Service and Repair
