landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Air Dryer, Suspension Control > < Accumulator, Suspension Control|Specifications|Page 4331
Page 1
background image

Accumulator: Service and Repair

AIR RESERVOIR

WARNING: Air suspension is pressurized to 10 bar (150 lbs/in2). Dirt or grease must not enter the system. Wear hand, ear and eye safety

standard protection when servicing system.

Remove

1. Depressurize system, refer to Electronic Level Control/Service and Repair/Depressurize System  See: Service and Repair
2. Raise the vehicle.

WARNING: Support on safety stands.

3. Clean air connection.

4. Release air pipe from reservoir, seal hose and reservoir.
5. Remove 3 bolts securing reservoir. Remove reservoir.

Refit

6. Fit reservoir, tighten bolts to 25 Nm. (18 ft.lbs.)
7. Remove seals from air pipe and reservoir.
8. Connect air hose to reservoir.
9. Leak test reservoir, refer to Electronic Level Control/Testing and Inspection/Air Leak Test Procedure  See: Testing and Inspection

10. Fit rubber boot to connection.
11. Remove safety stands. Lower vehicle.

Air Dryer, Suspension Control > < Accumulator, Suspension Control|Specifications|Page 4331