Range Rover (LP) V8-4.6L (2001)
Axle Shaft: Service and Repair
Remove
NOTE: This procedure gives removal instructions for the drive shaft and oil seal, plus the hub, bearing and drive flange assembly.
NOTE: If the hub and drive shaft are to be removed as an assembly, it is not necessary to slacken the drive shaft nut.
1. Remove center cap from front wheel, release stake from drive shaft nut. Slacken nut.
2. Remove brake disc shield. Refer to Brakes and Traction Control
3. Remove 2 bolts, remove backplate strap from hub.
4. Release ABS sensor from hub, remove sensor seal and bush.
5. Remove 6 bolts, remove hub and half shaft assembly from axle.