Range Rover (LP) V8-4.6L (2001)
/v8-4.6l/Page-924002.png)
9. Connect breather hose to switch. Connect multiplug to vehicle harness. Secure to bracket.
10. Engage switch on selector shaft. Fit nut to stud, fit bolt. Do not tighten.
11. Fit setting tool LRT-44-011 to shaft. Insert setting pin into tool.
12. Rotate switch until setting pin engages with hole in switch as shown.
13. Tighten nut and bolt. Remove setting tool.
14. Fit selector lever to shaft. Secure with nut.
15. Lower vehicle.
