Range Rover County LWB (LH) V8-4.2L (1993)
4.
Inspect the door latch with the aid of a flash light and identify the white plastic retainer for the super-lock pawl spring. (Figure 1)
5.
Position a long (18") slender screw driver onto the plastic cover. (Figure 2)
CAUTION:
In the next step exercise care to only apply enough force to break the plastic housing.
^
Too much force could result in damage to surrounding components or the door panel.
^
Windows with applied tints can be damaged by the screwdriver.
6.
Tap the screwdriver with a hammer to break the plastic cover.
7.
Remove the released spring.
8.
Move to the exterior of the door and perform the following:
^
Grasp the outer door handle.
^
Apply body pressure against the outer door surface to reduce load on the latch.
^
Tap the lock assembly motor repeatedly with the screwdriver (Figure 1) until the super-lock pawl releases.
9.
Release body pressure and open the door.