landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Body - Front Door Weatherstrip Wind Noise|Page 10885 > < Body - Front Door Weatherstrip Wind Noise|Page 10879
Page 1
background image

Weatherstrip: Customer Interest
Body - Front Door Weatherstrip Wind Noise

No:

76/06/01/NAS

Ref:
Issue:

1

Date:

09/07/01

Front Door Weather Seal Wind Noise

AFFECTED VEHICLE RANGE:

Range Rover (LP)

All

SITUATION:

NOISE FROM "A" POST AREA

The customer may complain of a low pitched wind noise/vibration coming from the area of the "A" pillar.

RESOLUTION:

INSTALL BUFFER TO REDUCE THE VIBRATION TENDENCY

Inserting a strip of double-sided tape in the interior of the U-shaped weather strip will provide a firm backing for the door to close against and eliminate
the tendency of the sealing lip to vibrate.

PARTS INFORMATION:

Local Source

1/2 inch double-sided tape As required

WARRANTY CLAIMS:

76.13.89/34

Time 0.30 hrs.
Install tape support into the door seal channel

FAULT CODE: U

Normal warranty policy and procedures apply.
Material allowance is included in labor operation.

REPAIR PROCEDURE

IDENTIFY THE SOURCE OF THE NOISE AND CORRECT

1.

Investigate the source of the noise and determine that it is not the upper windshield finisher. (See Service Action H201)

NOTE:

The noise generally will appear on the driver's side, but could also be present on the passenger's side door.

Body - Front Door Weatherstrip Wind Noise|Page 10885 > < Body - Front Door Weatherstrip Wind Noise|Page 10879