Range Rover County LWB (LH) V8-4.2L (1993)
/v8-4.2l/Page-487001.png)
Rocker Arm Assembly: Procedures
Rocker Shafts - Remove
Rocker shafts - remove
1. LH rocker shaft only: Remove screw securing dipstick tube to rocker cover.
2. Remove 4 Allen screws securing rocker cover to cylinder head.
Note: Note fitted position of 2 long screws. Later engines - multi-hex bolts are used.
3. Remove rocker cover.
4. Remove and discard gasket from rocker cover.
5. Mark each rocker shaft in relation to original cylinder head.
CAUTION: Incorrect fitment of rocker shafts will lead to an oil feed restriction.