Range Rover County LWB (LH) V8-4.2L (1993)
/v8-4.2l/Page-1522001.png)
Blower Motor Resistor: Service and Repair
REMOVE
-
Disconnect the battery negative lead and remove cowl panel.
Blower Resistor
-
Remove the two screws (2) securing the resistor.
-
Release the grommet (3) from the housing.
-
Remove the four screws (4) from the front dash closing panel.
-
Trace the resistor electrical wiring to the multiplug and disconnect.
-
Remove the resistor (6) complete with wiring and multiplug.
REFIT
-
Reverse the removal instructions.
