Range Rover County LWB (LH) V8-4.2L (1993)
Throttle Plate - PFI: Service and Repair
Inspect and Overhaul
1. Remove plenum chamber. See: Intake Air Plenum
2. Remove throttle lever. See: Throttle Cable/Linkage/Service and Repair/Throttle Lever
3. Examine throttle shaft for excessive wear between bushes in plenum chamber and shaft. A small amount of clearance is permissible. If excessive
wear is evident, fit new shaft and bushes as follows.
Throttle Plate Screws
4. Remove two split screws securing throttle disc and withdraw disc.
CAUTION: Take care not to damage shaft.
Throttle Shaft
5. Remove shaft and air seal from plenum chamber.
REFIT