Range Rover County LWB (LH) V8-4.2L (1993)
Throttle Cable/Linkage: Service and Repair
Throttle Lever
Disassemble
Throttle Linkage
1. Spherical bush/housing
2. Retaining clips (2)
3. Countershaft assembly
4. Overtravel spring
5. Throttle shaft nut
6. Throttle return spring (2)
7. Tab washer
8. Throttle stop lever
9. Throttle bracket assembly
10. Pop rivets (2)
REMOVE
1. Remove plenum chamber. See: Intake Air Plenum
2. If fitted, unclip cruise control actuator link. Hold throttle fully open, release link from countershaft assembly. Carefully return lever assembly to
close throttle.