landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Relays and Modules - Ignition System > < Electrical Specifications|Page 6088
Page 1
background image

Pick-Up Coil: Adjustments

Pick-up Gap Adjustment

1. The air gap between the pick-up limb and reluctor teeth must be set within the specified limits, using a non-ferrous feeler gauge.
2. If adjustment is necessary, slacken the two barrel nuts to set the air gap to 0.008-0.014 in (0.20-0.35 mm).

Relays and Modules - Ignition System > < Electrical Specifications|Page 6088