landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

All Other Service Bulletins for Battery Cable: > < Electrical - Intermittent Electrical/No Start Problems
Page 2
background image

CAUTION:

Always remove the negative cable first when disconnecting a battery. Refer to the WSM and observe all cautions and warnings.

1.

Disconnect battery and extract damaged bolt.

2.

Install new bolt and nut (YTJ000010) detailed in parts information.

3.

Tighten the new bolt to between 4 and 6 Nm (35.5 - 53 lbf.in.) on all vehicles.

All Other Service Bulletins for Battery Cable: > < Electrical - Intermittent Electrical/No Start Problems