landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABOUT US
Starter Solenoid > < Starter - Engine No-Start Condition|Page 7895

Range Rover County LWB (LH) V8-4.2L (1993)

Page 1
background image

Starter Motor: Service and Repair

1. Disconnect battery ground cable.
2. Raise and support vehicle.
3. Disconnect leads from solenoid and starter.
4. Remove heat shield.
5. Remove starter mounting bolts, then the starter.
6. Reverse procedure to install. Torque mounting bolts to 32 ft. lbs.

Starter Solenoid > < Starter - Engine No-Start Condition|Page 7895