Range Rover County LWB (LH) V8-4.2L (1993)
Compressor/Pump: Service and Repair
Air Compressor
Remove and refit
Remove
WARNING: The air compressor assembly becomes hot when running. Avoid personal contact or allow to cool.
1. Remove air supply unit, refer to Air Supply Unit See: Air Supply Unit
2. Remove compressor outlet pipe, seal all exposed ends.
3. Remove four fixing nuts.
4. Remove compressor assembly.
Refit
5. Inspect compressor mountings, replace if necessary.
6. Reverse removal procedure. tighten nuts to 7Nm (5 ft lb).
7. Check operation of compressor.
8. Leak test connections, refer to See: Testing and Inspection/Component Tests and General Diagnostics/Leak Test Procedure