Range Rover County LWB (LH) V8-4.2L (1993)
This TIB provides a library location for PRIDE information within the Land Rover North America technical literature system.
ACTION REQUIRED
Upon customer complaint of leaking front axle swivel seals, follow the procedure below.
PARTS INFORMATION
STC3435 - Grease Packet (with label)
FTC3401 - Oil Seal
FTC5105 - Swivel Pin Bearing Housing (ABS)
WARRANTY
Normal warranty procedures and policies apply.
FAULT CODE: N
SRO
Discovery and Defender 90
60.15.40 - Time 1.90 hrs. LH Swivel Seal
60.15.41 - Time 2.00 hrs. RH Swivel Seal
60.15.33 - Time 1.90 hrs. LH Swivel Housing
60.15.34 - Time 2.00 hrs. RH Swivel Housing
Range Rover Classic
60.16.40 - Time 2.35 hrs. LH Swivel Seal
*60.16.41 - Time 2.35 hrs. RH Swivel Seal*
60.16.33 - Time 2.45 hrs. LH Swivel Housing
60.16.34 - Time 2.40 hrs. RH Swivel Housing
PROCEDURE
NOTE:
Place information label (Figure 1) provided with the swivel grease tube on the radiator core support:
^
LH side next to the jacking instruction label
^
RH side next to body color label
Oil Removal, Cleaning and Seal Replacement
1.
Place vehicle on lift and elevate to remove front road wheels.
2.
Place a suitable drain pan underneath swivel pin housing.
WARNING:
If the vehicle axle is hot, the oil in the swivel bearing housing will be hot and under pressure. Exercise care when removing the drain plug.