Range Rover County LWB (LH) V8-4.2L (1993)
5)
Replace the damaged plastic film.
6)
Refit the graphics assembly to the tunnel and fit the securing screws, do not tighten at this stage.
7)
Locate the graphics assembly central to the gear selector lever and lightly tighten the fixings.
8)
Select all gears to ensure no side load is applied to the ball located in the film.
9)
Tighten all four fixings.
10)
Refit the console assembly (Refer to section 76 of the workshop manual).
WARRANTY
Normal warranty policy and procedures apply
COMP. CODE: 4F8E
SRO: 44.15.10-00.35 hour.
NOTE:
The recently published repair times contain incorrect information for this repair, please amend your copies.