Range Rover County LWB (LH) V8-4.2L (1993)
Seals and Gaskets: Service and Repair
Front Output Shaft Oil Seal
Front Output Shaft Oil Seal
Service tool: 18G1422
1. Disconnect front propeller shaft from flange.
2. Apply parkbrake and release drive flange nut.
3. Remove output shaft nut, steel washer, rubber seal and withdraw flange.
4. Prise out oil seal.
5. Lubricate and fit new seal using service tool 18G1422. Fit spring side of seal abuting circlip.
6. Examine flange if surface is corroded or worn by previous seal discard flange.
7. Lubricate seal running surface of flange.
8. Fit flange. Tighten to 224 Nm
9. Refit propeller shaft. Tighten to 46Nm