Range Rover SE (LP) V8-4.0L (1995)
2. Disconnect multiplug from amplifier.
3. Remove 2 screws securing amplifier to subwoofer box.
4. Remove amplifier.
Speaker
5. Release multi plug from casing.
6. Remove 8 screws securing subwoofer unit halves.
7. Remove upper half of unit.
8. Remove speaker.
Refit
9. Reverse removal procedure.
10. Check condition of all foam seals before assembly.
11. Seal speaker harness to subwoofer unit using black RTV silicone or similar sealant.