landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Procedures|Page 15688 > < Procedures|Page 15686
Page 3
background image

24. Fit outside handle operating rod to latch.
25. Fit retaining clip.
26. Fit private lock operating rod to latch.
27. Fit retaining clip.
28. Secure plastic sheet.
29. Fit front door trim casing. 

Remote Control - Front Door

Service repair no - 76.37.31

Remove

1. Remove front door trim casing. 
2. Release top rear corner of plastic sheet.
3. Pull remote handle out. Release inner cable from remote handle.

4. Release remote handle.
5. Remove 2 screws securing remote handle.
6. Remove outer cable from housing.
7. Remove remote by sliding rearwards.

Refit

8. Reverse removal procedure.

Procedures|Page 15688 > < Procedures|Page 15686