Range Rover SE (LP) V8-4.0L (1995)
Ride Height Sensor: Technical Service Bulletins
Air Suspension Front Height Sensor - Installation
14/7/95
60/04/95/US
SUBJECT
Air Suspension Front Height Sensor out of Range
MODEL
Range Rover 4.0 SE
AFFECTED VEHICLES
LP All
LH
LJ
LD
DETAIL
When fitting a front air suspension height sensor there is the possibility of incorrect installation. As the sensor is hidden from view by the sensors
heatshield, the top or bottom attachment bolts may not pass through the sensor. If this happens, the sensor would be able to rotate around one of the
bolts, and hence will not allow the EAS to be calibrated successfully.
Follow the procedure below to ensure correct fitment of a front height sensor.
ACTION REQUIRED
For information only
PARTS INFORMATION
N/A
PROCEDURE
When fitting the front air suspension height sensor ensure each bolt passes through the outer heat shield and then the sensor.
To ensure correct fitment always fit the bottom fixing bolt first, taking care to secure both the sensor and the heatshield.
WARRANTY
N/A
COMP. CODE
N/A
SRO
N/A