Range Rover SE (LP) V8-4.0L (1995)
/v8-4.0l/Page-2114002.png)
3. Fit adaptor LRT-54-008/8 to base tool and secure with screw.
4. Position joint to axle yoke.
5. Fit LRT-54-008/7 to base tool and position base tool assembly over joint and axle.
6. Align tool assembly and press joint into axle.
NOTE: Align tool assembly between each stroke of the ram until the joint is fully seated.
CAUTION: Damage to joint boot will result if tool is not correctly aligned during fitment.
7. Remove base tool assembly.
8. Fit swivel hub.
