Range Rover SE (LP) V8-4.0L (1995)
/v8-4.0l/Page-1681002.png)
10. Install new O-rings to fluid filter. Lubricate with clean transmission fluid.
11. Position fluid filter. Secure with bolts. Tighten to 8 Nm (72 inch lbs.) Position oil pick-up tube and spacer. Secure with bolt. Tighten to 8 Nm (72
inch lbs.).
13. Install new gasket to fluid pan. Position pan on gearbox. Secure with bolts and retaining plates. Tighten to 8 Nm (72 inch lbs.).
14. Install oil filler tube. Tighten to 70 Nm (52 ft. lbs.).
15. Lower vehicle.
16. Refill transmission fluid.
