landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ABOUT US
Transfer Case - Will Not Shift/MIL ON|Page 9792 > < Transfer Case - Will Not Shift/MIL ON|Page 9790

Range Rover SE (LP) V8-4.0L (1995)

Page 1
background image

Control Module: Service and Repair

REMOVAL

1. Move left hand front seat fully rearwards. Raise cushion for access.
2. Disconnect battery negative lead.
3. Remove 3 fixings securing trim to seat base. Remove trim.

4. Remove 2 screws securing cover to Electronic Control Unit (ECU). Remove cover.
5. Release multiplug from ECU.

Transfer Case - Will Not Shift/MIL ON|Page 9792 > < Transfer Case - Will Not Shift/MIL ON|Page 9790