Range Rover SE (LP) V8-4.0L (1995)
/v8-4.0l/Page-1793001.png)
Flywheel Gear: Testing and Inspection
1. Inspect flywheel face for cracks, scores and overheating. The flywheel can be refaced on the clutch face providing thickness does not go below
minimum.
Flywheel Minimum Thickness A: 40.45 mm
2. Inspect starter ring gear for worn, chipped and broken teeth.
CAUTION: Do not attempt to remove reluctor ring.
3. Renew starter ring gear if necessary.
