landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Hood Sensor/Switch (For Alarm) > < Antitheft Antenna|Service and Repair
Page 2
background image

9. Release the headliner for access.

^

Release the 2 clips.

10. Remove the alarm antenna.

^

Release and disconnect the electrical connector.

^

Remove the 2 bolts.

Installation

1. Install the alarm antenna.

^

Tighten the bolts to 6 Nm (4 lb.ft).

^

Connect and secure the electrical connector.

2. Install the headliner. Secure in the clips.
3. Attach the door weatherstrips.
4. Install the passenger assist handles.

^

Install the screws.

^

Secure the screw covers.

5. Install the rear speakers.

^

Connect and secure the electrical connectors.

^

Install the screws.

^

Install the speaker grilles.

6. Install the D-pillar upper trim panel.
7. Install the C-pillar upper trim panel.
8. Install the B-pillar upper trim panel.
9. Connect the battery ground cable.

Hood Sensor/Switch (For Alarm) > < Antitheft Antenna|Service and Repair