Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-3010003.png)
^
Remove the retaining plate.
^
Repeat the above procedure for the other lamp.
15. Remove the volumetric module.
^
Release the 4 clips.
^
Disconnect the electrical connector.
16. Remove the volumetric module bezel.
17. Remove the headliner wiring harness.
18. Remove the 2 clips.
Installation
1. Install the clips.
2. Install the headliner wiring harness.
3. Install the volumetric module bezel.
4. Install the volumetric module.
^
Connect and secure the electrical connector.
^
Secure the clips.
5. Install the interior lamp bezels.
^
Connect the electrical connector.
^
Install the retaining plate.
