Range Rover Sport (LS) V8-4.2L SC (2006)
6. Remove the front seat track motor.
^
Disconnect the electrical connector.
^
Release the electrical connector.
^
Remove the 8 nuts.
Installation
1. Install the front seat track motor.
^
Tighten the nuts to 25 Nm (18 lb.ft).
^
Connect the electrical connector.
^
Secure the electrical connector
2. Install the front seat base.
^
Tighten the nuts to 25 Nm (18 lb.ft).
3. Install the front seat base finisher.
^
Secure in the clips.
^
Tighten the screw.
4. Install the front seat cushion side finisher.
^
Secure in the clips.
^
Tighten the screws.
5. Install the front seat control switch.
^
Secure in the clips.
^
Tighten the screws.
6. Install the front seat.