Range Rover Sport (LS) V8-4.2L SC (2006)
Installation
1. Install the rear seat backrest cover.
^
Install the hog rings.
^
Attach the clips.
2. Install the rear seat head restraint retaining clips.
3. Install the rear seat head restraint.
4. Install the rear seat release handle finisher.
^
Tighten the screw.
5. Install the rear seat release handle.
6. Install the safety belt guide and retractor cover.
^
Attach the safety belt guide and retractor cover.
^
Tighten the screws.
Rear Seat Cushion Cover
Rear Seat Cushion Cover
Service Repair No - 78.40.70
Removal
NOTE: This procedure shows the removal and installation of both the LH and the RH covers.
1. Fold the seat cushion forward.
2. Release the rear LH seat cushion cover.
^
Release the clip.
3. Remove the rear LH seat cushion cover.
^
Remove the 21 hog rings.