Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-944001.png)
Supercharger Coolant Pump: Service and Repair
Coolant Pump
Service Repair No - 26.50.26
Removal
NOTE: This procedure covers the removal and installation of the supercharger auxiliary coolant pump.
1. Disconnect the battery ground cable.
2. Remove the cooling fan.
3. Remove the cooling fan lower shroud.
^
Release 2 clips from the cooling fan lower shroud.
^
Release and remove the cooling fan lower shroud from the cooling pack.
4. Drain the supercharger cooling system as required.
5. Disconnect the 2 coolant pump hoses.
^
Clamp the relevant hoses, to minimize the coolant loss.
^
Position a container to collect the fluid.
^
Release the 2 clips.
6. Remove the coolant pump.
^
Disconnect the electrical connector.
^
Remove the clamp bolt.
Installation
1. Install the coolant pump.
^
Install the coolant pump and align with bracket register.
^
Tighten the bolt to 6 Nm (4 ft. lbs.).
^
Connect the electrical connector.
