Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-948002.png)
Installation
1. Install the coolant pump.
^
Clean the component mating faces.
^
Install a new gasket.
^
Install the bolts and tighten to 10 Nm (7 ft. lbs.).
2. Install the coolant pump drive pulley.
^
Install, and lightly tighten the bolts.
3. Install the accessory drive belt.
4. Tighten the coolant pump pulley retaining bolts.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
5. Connect and secure the coolant hose.
^
Clean the component mating faces.
6. Connect the battery ground cable.
7. Refill the cooling system.
