Range Rover Sport (LS) V8-4.2L SC (2006)
8. Remove the exhaust manifold heat shield. Remove the 2 bolts.
CAUTION: Under no circumstances should the crankshaft setting peg, 3O3-45, be used in the following operations, to restrain the crankshaft.
9. Using the special tools retain the crankshaft pulley.
NOTE: The crankshaft pulley retaining bolt will be very tight.
10. Using the special tools remove the crankshaft pulley bolt.
^
Discard the bolt.
^
Remove the special tools.
NOTE: The crankshaft pulley will be very tight.
11. Using the special tools remove the crankshaft pulley.
^
Collect the locking ring.