Range Rover Sport (LS) V8-4.2L SC (2006)
5. CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the
crankshaft.
Using the special tools, retain the crankshaft pulley.
6. NOTE: The crankshaft pulley retaining bolt will be very tight.
Remove the crankshaft pulley retaining bolt.
^
Discard the bolt.
7. Remove the special tools.
8. NOTE: The crankshaft pulley will be very tight.
Using the special tools, remove the crankshaft pulley.
^
Collect the locking ring.