Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1437002.png)
8. Remove the MAP sensor.
^
Remove the Allen screw.
^
Discard the O-ring seal.
NOTE: Do not disassemble further if the component is removed for access only.
9. Remove the supercharger pressure relief actuator.
^
Remove the bolt.
^
Disconnect the actuator link.
^
Remove the vacuum line.
Installation
1. Install the supercharger pressure relief actuator.
^
Clean the component mating faces.
